1.Basic structure of machine
2.Limit switch (3)
X axis /Y axis(left) /Z axis
3.Cutting head
① In/Out (black) Water tube
② Transparent pipe (2 ins)
③ Encoder Line (Green line)
④ Power line(Orange line)
⑤ Amplifier line(side=green line)
●Red light clear
●Not clear
Length of leadline can be set by yourself
③ Micro joint (prevent the part bend up,bump with the head)
File -Open the new design
① Insert the USB
(make sure USB has the drawing with your required size&the drawing already been perfectly)
② File - Open - USB - File
③ Check the details of drawing
1.Scale
2.details(whether there’s any lines/circles not need-delete)
3.choose the drawing
If it’s necessary according to your requirement.
A.Leadline B.Micro joint C.Bridge D.Sort E.Array(Copy) F.Co-edge
Separate the array drawings.
① Choose them all.
② If they are in a group,click”ungroup”
③ Choose the line what you wanna cancel and click “delete”
Defilm
(for the metal material which is hot clean enough,like rust/dust...)
Beside the cutting parameter layer,you also should click ” defilm”.
And if it’s not displayed when you import the first layer of cutting,you can import from the file box (cutting parameters of 6kw),find “marking,it’s tool”,and import it.