What are the operating steps of a laser cutting machine? It is a must-have for beginners

With the increasing popularity of laser cutting machines in the market, many employees are gradually exposed to laser cutting work. The job of laser cutting is to operate machines to achieve production, and most enterprises focus on production to increase their output value. So what are the operating steps of a laser cutting machine that beginners must see?

1. Preparation work: Ensure that the power supply and cooling system of the laser cutting machine are working properly, check whether the cutting head and fiber of the cutting machine are clean, and prepare the materials to be cut.

2. Parameter setting: Set appropriate cutting parameters based on the type and thickness of the material to be cut. These parameters include laser power, cutting speed, gas flow rate, etc.

3. Material positioning: Place the material to be cut on the cutting table and secure it using fixtures or magnetic suction to ensure accurate positioning of the material.

4. Adjust the focal length: Adjust the focal length of the cutting head so that the laser beam can accurately focus on the surface of the material. It can usually be achieved by moving the cutting head or adjusting the lens.

5. Start cutting: Press the start button to start the laser cutting machine. The laser beam is emitted from the cutting hair, focused by a lens, and then irradiated onto the surface of the material for cutting.

6. Monitoring the cutting process: During the cutting process, the cutting process can be monitored by observing the position relationship between the cutting head and the material, as well as the quality of the cutting lines. If necessary, cutting parameters or focal length can be adjusted to optimize the cutting effect.

7. Complete cutting: Stop the laser cutting machine when the cutting is completed. Pay attention to safety and wait for the cutting head to cool down before proceeding to the next step.

8. Cleaning work: Clean up the waste and debris generated by cutting, clean the cutting head and optical fiber, and ensure the normal use and maintenance of the equipment.

So what are the operating steps of a laser cutting machine that beginners must see? It should be noted that when operating the laser cutting machine, it is necessary to strictly follow the relevant safety operating procedures, wear personal protective equipment, and avoid direct exposure of the laser beam to the eyes or skin to avoid injury. Have you all learned