How to remove the alarm of the capacitance drop of the cutting head?

It’s normal that the cutting head would alarm when you first operate this fiber laser cutting machine, and we would provide solutions according to the reality, so don’t worry about that.

Given that this is your first time to install the cutting head, you need to do something to stop the alarm of the capacitance drop, there are three steps should be done by yourself, please read it step by step.

Step 1: Open the “Cypcut software” and click the “CNC” on the top of the control platform, and then click the “BCS100”, choose F1 and “2” to do the calibration order.

Step 2: Put a piece of metal board on the working platform( under the cutting head), and then to move the Z axis (the cutting head) down by operating the handle, so as to set the distance between the metal board and the cutting head is about 1-5cm. The cutting head would automatically focus on the board and run the calibration order within 15 seconds. After this step, the software would pop us this screen that express the stability and smooth quality, and then you could save it, and the alarm would be removed.

Step 3: You could enable the cutting head back to the origin by operating the software, and then to operate the machine.